How do I install mcp-3D-printer-server?

Its own README gives this command: npx -y mcp-3d-printer-server. Run it where your MCP client can launch the server, and check the README for any settings it asks for.

What does mcp-3D-printer-server connect to, and what does it need?

It reaches bambu. The credentials we found in its source are BAMBU_TOKEN.

Is mcp-3D-printer-server official and is it maintained?

We found nothing naming it as a vendor’s official server. Its repository has 256 GitHub stars and its state in our directory is listed. Its last commit we recorded was on 2026-10-20.

What licence does mcp-3D-printer-server use?

The repository declares the GPL-2.0 licence.

InfratoApp / Resources / MCP servers / mcp-3D-printer-server

mcp-3D-printer-server

mcp-3D-printer-server is an MCP server. It reaches bambu. It needs BAMBU_TOKEN to authenticate. Its repository has 256 GitHub stars and is licensed under GPL-2.0; we last read it on 2026-10-22.

Connects to major 3D printer APIs to control prints, monitor status, and perform STL operations. Slicing and visualization included.

Install

Read from mcp-3D-printer-server’s own README, close to verbatim -- not written by us, and not guessed.

npx -y mcp-3d-printer-server

View in mcp-3D-printer-server’s own README ↗

What it reaches, and what it needs

Reaches

bambu

Credential

BAMBU_TOKEN

What it connects to

Wraps

Orca

Unverified means a mention in the server’s own description, not a citation. A wrong claim here costs nothing to correct and nothing to trust yet.

Maintenance

Stars

256

State

listed

Licence

GPL-2.0

From the repository

Connects MCP to major 3D printer APIs (Orca, FULU's Orca/Bambu, OctoPrint, Klipper, Duet, Repetier, Prusa, Creality). Control prints, monitor status, and perform advanced STL operations like scaling, rotation, sectional editing, and base extension. Includes slicing and visualization.

View on GitHub ↗2026-10-22

What mcp-3D-printer-server can do

3 tools documented in its README. An AI client calls these by name.

check_fulu_orca_setup: No description in the README.
slice_stl: No description in the README.
print_3mf: No description in the README.

Read from the README; names are kept only if the README contains them.

Common questions about mcp-3D-printer-server

What does mcp-3D-printer-server do?: Connects to major 3D printer APIs to control prints, monitor status, and perform STL operations. Slicing and visualization included.
How do I install mcp-3D-printer-server?: Its own README gives this command: npx -y mcp-3d-printer-server. Run it where your MCP client can launch the server, and check the README for any settings it asks for.
What does mcp-3D-printer-server connect to, and what does it need?: It reaches bambu. The credentials we found in its source are BAMBU_TOKEN.
Is mcp-3D-printer-server official and is it maintained?: We found nothing naming it as a vendor’s official server. Its repository has 256 GitHub stars and its state in our directory is listed. Its last commit we recorded was on 2026-10-20.
What licence does mcp-3D-printer-server use?: The repository declares the GPL-2.0 licence.